| Product Category | Product Model | Product Features | Application Fields |
| UV Printing Adhesion Ink | UV-112A | Good adhesion, high brightness. | |
| UV-114 | Excellent adhesion, high brightness, good stretch resistance. | ||
| UVP-112DNT-AB | Excellent adhesion, dedicated for cigarette packaging. | ||
| WP-2101E | Water-based clear varnish, excellent compatibility with UV inks, good wear resistance. | ||
| UV Offset Matte Ink | UV-110Y6 Series | Best matte effect; slight roller build-up when printing for too long; good surface wear resistance. | |
| UV-110Y7 Series | High matte degree, excellent printability; no easy build-up on ink rollers during long-term printing; good surface wear resistance. | ||
| UV-110Y8 Series | Moderate matte degree, excellent printability; no easy build-up on ink rollers during long-term printing; excellent surface wear resistance. | ||
| UV Offset Gold & Silver Ink | UV Series | UV-180 | Silver ink |
| UV-185 | Red gold ink | ||
| UV-186 | Green gold ink | ||
| UVBD Series | UVBD-180CNT | Silver ink | |
| UVBD-185CNT | Red gold ink | ||
| UVBD-186CNT | Green gold ink | ||
| UV Offset Fluorescent Ink | UVT-701A | Fluorescent blue | ● Complete range of fluorescent colors ● Bright colors ● Good printability ● Additional anti-counterfeiting fluorescent series: UVT-708 Anti-counterfeiting Fluorescent Red, UVT-709 Anti-counterfeiting Fluorescent Blue ● Note: Fluorescent colors are bright, but have low light resistance, weather resistance and chemical corrosion resistance, and are prone to fading or discoloration. Please use as appropriate. |
| UVT-702A | Fluorescent green | ||
| UVT-703A | Fluorescent yellow | ||
| UVT-704A | Fluorescent orange | ||
| UVT-705A | Fluorescent red | ||
| UVT-706A | Fluorescent pink | ||
| UVT-707A | Fluorescent purple-pink | ||
| UVT-710A | Fluorescent lemon yellow | ||
| UV Offset Ink Additives & Auxiliary Materials | UVT-161 Diluent | Ink diluent | |
| UV-120 Ink Adjusting Oil | Complies with VOCs requirements for cigarette packaging; an additive that effectively reduces ink tack and viscosity; very thin (improves ink fluidity after addition); recommended addition amount: 2-3%, maximum dosage: within 5%; please stir well. | ||
| UV-130 Tack Reducer | Complies with VOCs requirements for cigarette packaging; an additive that effectively reduces ink tack and viscosity; paste-like; recommended addition amount: 2-3%, maximum dosage: within 5%; please stir well. | ||
| UV-140 Drying Auxiliary | Enhances UV ink curing speed; recommended addition amount: generally 2-5%. Applicable to all UV offset inks except those for cigarette labels, mainly used in dark and other hard-to-cure color systems. Add directly to UV offset ink and stir well. | ||
| Reinforcer | Enhances ink surface smoothness and scratch resistance; recommended addition amount: 1-2%, please stir well. Under different printing conditions, if the improvement in surface smoothness is not obvious, an additional 0.5-1% can be added (maximum addition amount: no more than 5%). Excessive addition of reinforcer will reduce the printability of the ink. In addition, adding reinforcer may cause subsequent processes (such as varnishing, gold stamping, and film lamination) to fail. |
